The iTaste CLK 1280 is an advanced starter electronic cigarette that has all of the convenience of the iTaste CLK! and is built with a larger long lasting 1280mAh battery.
The iTaste CLK! 1280 utilizes Innokin’s ‘Vape while you charge’ passthrough technology which means it will never run out of power and always be ready to vape. The iTaste CLK! 1280 is charged via a micro-usb port conveniently located beside the comfortable tri-color on/off button and power level indicator.
This variable voltage mod has a range of 3.5 to 5 volts and is adjusted in small increments by turning the wheel on the base of the device. Simply click your desired voltage setting securely into place the iTaste CLK! 1280 will give you the perfect amount of flavor and vapor every time.
Battery Level Indicator: The iTaste CLK battery capacity is displayed via green, yellow and red LED lights. When the iTaste CLK! battery is fully charged the LED light on the firing button will turn green and power off.
Green = Fully Charged
Yellow = Half Power.
Red = Low Power. Please Charge.
Large battery capacity: The iTaste CLK1280 has a built-in 1280 mAh polymer Li-Ion rechargeable battery.
ON/OFF battery switch: Press the power button three times in rapid succession to turn on the iTaste CLK!. Once the iTaste CLK! is On hold down the power button to activate the atomizer and vape. When the iTaste CLK! is not in use press the power button three times in succession to power off the iTaste CLK! Advanced Personal Vaporizer. Always power off the iTaste CLK! Advanced Personal Vaporizer when it is not being used, or when it is going to be stored in a pocket, bag or purse.
Short Circuit/Atomizer Protection: Short Circuit/Atomizer Protection protects the iTaste CLK! Advanced Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions.
Over-Discharge Protection: The iTaste CLK! Advanced Personal Vaporizer monitors the battery voltage and will automatically power off when the battery is discharged.
Variable Voltage: The rotational wheel adjusts voltage in the following increments: 3.5, 3.8, 4.0, 4.3, 4.5, 4.8, 5.0
The red LED will blink six times and turn off if the rotational wheel is not in place.
To set your desired voltage turn the rotational wheel to the left or right until you hear an audible click. When adjusting the voltage with the rotational wheel always check to ensure the wheel is set to your desired voltage.
Standby current: 50uA max
Maximum output current：3.5A
Maximum output wattage：15W
Clearomizer Resistance: 1.2 ohm (minimum), recommendation 2.5Ohm
Battery: Built-in 1280 mAh polymer Li-Ion rechargeable battery.
Charging: Micro USB DC5V/500mA
Short Circuit Protection: 0.6 +/-0.2 ohm